Faculty of Alliance College and Engineering Design

Dr. Harinath Aireddy

Assistant Professor


harinath.aireddy@alliance.edu.in

Dr. Harinath Aireddy received his doctoral degree in Instrumentation & Device Fabrication from IIT Kharagpur, and his M.Tech. degree in Composite Materials from NIT Rourkela. He is an Assistant Professor and active scientist in the Department of Electronics and Communication Engineering.

He has specialized in Instrumentation (design, fabrication, testing, data acquisition, automation and computer control with LabVIEW, calibration and demonstration), spintronics and advanced materials. Through a serious of investigations, he has developed Cantilever Beam Magnetometer (CBM) for electric field induced magnetic measurements, which is the first of its kind in the world. He has also developed an ultra-low-vibration Liquid Nitrogen (LN2) flow cryostat (which is inexpensive, has reduced vibration and fantastic variable temperature) for low temperature measurements in optical cantilever beam magnetometer set-up, which is also the first of its kind in the world. Further, Dr. Aireddy also developed a double cantilever beam set-up for simultaneous magnetostriction measurements of two different or same type of samples for sensor/actuator applications.  He has also been one of the researchers in the world to fabricate and investigate semiconductor-based spin diodes and spin transistors for MRAM and MFRAM applications.

 

Publications

International Journals/Conference proceedings

  1. Electric field dependence of junction magnetoresistance in magnetite/semiconductor heterostructure at room temperature: H. Aireddy, S. Bhowmik and A. K. Das, Appl. Phys. Lett. 107, 232406 (2015).
     
  2. Enhancement and sign inversion of junction magnetoresistance on Mn substitution in magnetite/p-Si heterostructures: H. Aireddy and A. K. Das, J. Phys. D: Appl. Phys. 49, 415003 (8pp) (2016).
     
  3. Evaluation of dielectric behavior of bio-waste reinforced polymer composite, H. Aireddy and S.C.Mishra, Journal of Reinforced Plastics and Composites 30(2) ,134-141, 2011
     
  4. Effect of Chemical Treatment of Coir Dust on the Dielectric Behavior of Bio-waste Reinforced Polymer Composites, H. Aireddy and S.C.Mishra, Journal of Materials and Metallurgical Engineering, 2 (1), 2012.
     
  5. Tribological behavior and mechanical properties of Bio-waste reinforced polymer matrix composites, H. Aireddy and S.C.Mishra, Journal of Metallurgy and Materials Science, 53(2), 139-152, 2011
     
  6. Electro-magnetic transport and rectifying property of Fe2.5Mn0.5O4/p-Si heterojunction: H. Aireddy and A.K. Das, AIP Conf. Proc. 1728, 020107 (2016).
     
  7. Impedance and Modulus Spectroscopy Analysis of Mn0.5Zn0.5Fe2O4   Nanoparticles: H. Aireddy, U. Bidayat and A.K. Das, AIP Conf. Proc. 1512, 328 (2013).
     
  8. Development of liquid nitrigen flow crystat for optical cantilever beam magnetometer measurements: H. Aireddy and A. K. Das, (to be submitted).
     
  9. Design and fabrication of double cantilever beam for simultaneous magnetical characterizations: H. Aireddy and A. K. Das, (to be submitted).
     
  10. Cantilever beam magnetometer for electric field induced magnetization measurements: H. Aireddy and A. K. Das, (to be submitted).
     
  11. Influence of Zn substitution on junction magnetoresistance of Fe3-xZnxO4/p-Si heterostructures at room temperature: H. Aireddy and A. K. Das, (to be submitted).

 

Books

  1. Study of the dielecetrical and wear properties of coir dust composites: LAP LAMBERT Academic Publishing, (2012),ISBN-13:978-3-8473-3111-7. 

 

Conferences/Workshops

  1. Magnetic backward diode exploiting crossover spin valve action in manganese substituted magnetite/semiconductor heterojunctions: H. Aireddy and A. K Das, Materials Research Society (MRS) Spring Meeting-2017, Phoenix, Arizona, USA.
     
  2. Cantilever beam magnetometer for determining the magnetization of ferromagnetic/ferroelectric heterostructures: H. Aireddy and A. K Das, Emerging Trends in Physics of Surfaces, Interfaces and Nanostructures (ET-PSIN)-2017, IACS-Kolkata, India.
     
  3. Electro-magnetic transport and rectifying property of Fe2.5Mn0.5O4/p-Si heterojunction: H. Aireddy and A.K. Das, ICC- 2015, International Conference on Condensed Matter and Applied Physics, Bikaner, Rajstan.
     
  4. Electromagnetic transport properties of ferrite/semiconductor heterostructure: H. Aireddy, R.J. Choudhary and A.K. Das, PSI 2014, 3rd international conference on Physics at Surfaces and Interfaces, Puri, Odisha.
     
  5. Impedance and Modulus Spectroscopy Analysis of Mn0.5Zn0.5Fe2O4   Nanoparticles: H. Aireddy, U. Bidayat and A.K. Das, Proceedings of the DAE Solid State Physics Symposium (2012), pp.328-329. 
     
  6. Backward rectifier exploiting tunable junction magnetoresistance in Fe3-xMnxO4/p-Si heterostructures: H. Aireddy and A. K. Das, ICFM-2016, IIT Kharagpur, India. 
     
  7. Giant positive magnetoresistance in ferrite/semiconductor heterostructure: H. Aireddy and A.K. Das, NCPCM- 2013, 3rd national conference on processing and characterizations of materials, National Institute of Technology, Rourkela. 
     
  8. Rectifying property and spin valve action of   Fe3O4/p-Si heterojunction: Harinath Aireddy, Sudipta Bhowmik and Amal Kumar Das, ICANN-2015, 4th International Conference on Advanced Nanomaterials and Nanotechnology, IIT Guwahati, Assam.
     
  9. Room temperature negative junction magnetoresistance in Fe2.5Zn0.5O4/p-Si heterostructure: H. Aireddy and A.K. Das, NCPCM- 2015, 5th national conference on processing and characterizations of materials, National Institute of Technology, Rourkela. 
     
  10. Studies on dielectric and conductivity properties of bio-waste reinforced polymer composites, H. Aireddy and S.C.Mishra, MACRO 2010, 11th international conference on Frontiers of Polymers and Advanced Materials, Indian Institute of Technology, Delhi.
     
  11. Studies on abrasion wear behavior of cor dust reinforced polymer composites, H. Aireddy and S.C.Mishra, APSRT 2011, Inationternal conference on Advances in Polymer science and Rubber Technology, Indian Institute of Technology,  Kharagpur.
     
  12. Processing and properties of bio-waste reinforced polymer composites, H. Aireddy and S.C.Mishra, ISRS 2010 International Symposium for research Scholars on metallurgy, Materials Science and Engineering, Indian Institute of Technology, Chennai.